News

Fusion Splicer ALK-88A (portable) Fiber Optic Equipment is a Mini type Fusion splicing machine and have our own intellectual property right of fiber adjustment technology Splicing Splices create a permanent joint between two fibers, so its use is limited to places where cables are not expected to be available for servicing in the future. The most common application for splicing is concatenating (joining) cables in long outside plant cable runs where the length of the run requires more than one cable. Splicing can be used to mix a number of different types of cables such as connecting a 48 fiber cable to six 8 fiber cables going to various locations. Splicing is generally used to terminate singlemode fibers by splicing preterminated pigtails onto each fiber. And of course, splicing is used for OSP restoration. Splicing is more common in outside plant (OSP) applications than premises cabling, where most cables are pulled in one piece and directly terminated. Splicing is only needed if the cable runs are too long for one straight pull or you need to mix a number of different types of cables (like bringing a 48 fiber cable in and splicing it to six 8 fiber cables.) And of course, we often use splices for OSP restoration, after the number one problem of outside plant cables, a dig-up and cut of a buried cable, usually referred to as "backhoe fade" for obvious reasons! There are two types of splices, fusion and mechanical. Fusion splicing is most widely used as it provides for the lowest loss and least reflectance, as well as providing the strongest and most reliable joint. Fusion splicing machines are available in two types that splice a single fiber or a ribbon of 12 fibers at one time. Virtually all singlemode splices are fusion. Mechanical splicing is mostly used for temporary restoration and for multimode splicing. In the photo below, a fusion splice is on the left and the rest are various types of mechanical splices. Splices: fusion on the far left, other types of mechanical splices.

ALK66-A Optical Fiber Cleaver, China Fusion Splicer Fiber Cleaver Product Features Applicable fiber:/single bare fiber diameter quartz fiber cutting/ 125um fiber coating diameter:/250 ~ 900um cutting angle:/less than 0.5 (single fiber) Cutting length/ 13mm Blade cutting life/25,00 times * 16 surface rotation using Imported ultrafine particles of tungsten steel alloy made of rigid material, the international leader in process of production from the edge of the mirror surface finish, quality is stable and reliable. 100 times magnification zoom blade, into a complete curve, no uneven. Chipping blade under the microscope at 200 times as 0.003mm Cutter size / weight/70L × 54W × 58H (mm) / 238g (150g, length 70 * 54 * 52 feature on the machine) Basic Specification Adapt fiber Single quartz fiber Adapt fiber coating diameter dia.0.25 & 0.9 Adapt bare fiber diameter 125um Cutting the fiber length 10~16mm(0.25) 10~16(0.9) Dimensions 63mm(W)×76mm(D) ×63mm(H) Weight Around 425g Cutting angle fitness ≤0.5 Blade life 36000 times Package 1* fiber cleaver with blade 1* single fiber adapter 1* cut-off collector 1* carrying case